MP-6 gas mask

MP-6 gas mask
Typegas mask
Place of origin Poland
Service history
Used byChorągiew Wojska Polskiego Polish Armed Forces
Production history
Designermaskpol
Manufacturermaskpol
No. built~28,400

The MP-6 Gas Mask is a Polish military gas mask and a successor to the MP-5 masks.

Purpose

The MP-6 mask (codenamed Apollo) is designed to protect the soldier's respiratory system from toxic warfare agents, radioactive dust and bacterial aerosols. In addition, the mask's design allows for the intake of fluid and conversation while wearing it.[1]

The NATO standard filter (40 mm thread) is attached to the mask from the side (on the right, left or both sides, depending on the user's needs). The panoramic visor from the MP-5 mask is replaced by two smaller glasses.[1] Additionally, the mask glasses are protected with polycarbonate ballistic lenses.[2]

The fluid collection tube is NATO standard, allowing you to attach a water bottle, canteen or camel toe.[2]

Production

The mask is manufactured by Maskpol, a company belonging to the Polish Armaments Group. Maskpol previously also produced MP-5 masks.[3]

The mask was presented at MSPO 2010,[4] at MSPO 2011 (where she was awarded the DEFENDER statuette)[5] and MSPO 2012.[6]

On October 12, 2012, an agreement was signed between the Armament Inspectorate and Maskpol for the delivery of 28,400 MP-6 gas masks in the years 2012–2015. The cost of the masks is to be approximately PLN 21.1 million.[3][7][8][9]

Specifications

  • Goggles: polyamide shrapnel-proof goggles (m=325 [mg], V=215 [m/s]
  • mountable external laser protective lenses
  • Shelf-life: Made from formulated hypoallergenic rubber with proven shelf-life of 15 years
  • Water Usage: safe water intake port allowing for hydration in contaminated environment (>600cm3/5min)
  • Inhalation: low CO2 content in inhalation air (<0,8%)
  • Vision: possibility of mounting lenses for optical correction of vision
  • Chemical warfare: over 24-hours’ protection against chemical warfare (CW) agents
  • Weight: Total weight of a complete mask (with combined filter FP-6) less than 800 [g] (the largest size available)
  • Filter: low breathing resistance with combined filter FP-6
  • Size: Available in three sizes
  • Communication: voicemitter providing effective communication[10]
MP-6 gas mask at MSPO 2012

Operators

References

  1. ^ a b "Maska przeciwgazowa MP-6". GasMasks.Bialystok.pl.
  2. ^ a b Kurmanow, Mateusz. ""Kto nie idzie na przód, ten się cofa". Podsumowanie wizyty NTW w Przedsiębiorstwie Sprzętu Ochronnego MASKPOL SA". Nowa Technika Wojskowa. 9/2007. Warszawa: Magnum-X Sp. z o.o.: 66–67. ISSN 1230-1655.
  3. ^ a b "Zamówienie dla Maskpolu na MP-6 i FOO-1". Altair Agencja Lotnicza Sp. z o.o. 15 October 2012. Cite error: The named reference "altairzamowienie" was defined multiple times with different content (see the help page).
  4. ^ "e-RAPORT MSPO 2/2010 – Nowe zbroje i ubiory z Maskpolu", Altair, 2010-09-06, archived from the original on 22 July 2014
  5. ^ "e-RAPORT MSPO 4/2011 – Defendery wręczone", Altair, archived from the original on 28 August 2012
  6. ^ "Prezydent RP i minister obrony na targach w Kielcach". Ministerstwo Obrony Narodowej. 3 September 2012.
  7. ^ "Maskpol dostarczy sprzęt Wojsku Polskiemu", Defence24, 2012-10-15
  8. ^ "Protokół postępowania o udzielenie zamówienia na dostawę w latach 2012–2015 filtracyjnych masek przeciwgazowych MP-6" (PDF), bip.mon.gov.pl, archived from the original (PDF) on 3 December 2019
  9. ^ "MASKPOL ochroni polskich żołnierzy", Bumar, 2012-10-16
  10. ^ "GAS MASK MODEL MP-6 WITH FILTER". maskpol. Retrieved 20 January 2025.