મદદ:Convert messages
આ પાનું જ્યારે ઢાંચો {convert}ના વપરાશ વડે અપાયેલી કિંમતના એક એકમને બીજામાં બદલવા વખતે Module:Convert દ્વારા નોંધાયેલા ક્ષતિ અને ચેતવણી સંદેશાઓની સમજૂતી આપે છે.
- Help:Convert • સર્વસામાન્ય નિરીક્ષણ. (અંગ્રેજી)
- Help:Convert units • સામાન્યપણે વપરાતા એકમોની સરળ યાદી. (અંગ્રેજી)
પૂછાતા પ્રશ્નો
જો પ્રશ્ન સહેલાઈથી હલ ન થાય તો નીચેમાંથી કોઈ એક જગ્યાએ જાણ કરો.
- ઢાંચાની ચર્ચા:Convert • ઢાંચાના વપરાશ વિશે પ્રશ્નો, કે ઉત્પન્ન થતી સમસ્યાઓ વિશે ચર્ચા.
- વિકિપીડિયા:મદદ • સામાન્ય પ્રશ્નો.
- Module talk:Convert • મોડ્યુઅલ વિશેની ચર્ચા.
ભૂલ અને ચેતવણી સંદેશાઓ
એક અંક જરૂરી
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|m|ft}
→ 123 metres (404 ft){convert||m|ft}
→ [convert: needs a number]
આગત અંક (input number) જરૂરી છે. ઉપર પ્રથમ ઉદાહરણમાં, આગત અંક 123
છે.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અન્ય અંક જરૂરી
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|10|x|20|m|ft}
→ 10 by 20 metres (33 ft × 66 ft){convert|10|x| |m|ft}
→ [convert: needs another number]{convert|10|x|20|x| |m|ft}
→ [convert: needs another number]
પ્રથમ આગત અંક ચોક્કસ છે, પણ હરોળ માટે બીજો અંક જરૂરી છે.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અમાન્ય અંક
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|1|km|ft}
→ 1 kilometre (3,300 ft){convert|km|ft}
→ [convert: invalid number]
A number to be converted can be entered as in these examples: 1.23
or 1,234
or -0.9
.
Fractions are entered as in these examples: 1+2/3
(1 2⁄3) or -1-2/3
(−1 2⁄3) or 2/3
(2⁄3).
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
બહુ વધારે અંક
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|1e290|m|ft}
→ 1×10290 metres (3.3×10290 ft){convert|1e310|m|ft}
→ [convert: number overflow]
This error occurs if a number exceeds the range of values available for calculations. The number 1e290 means 1×10290.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અમાન્ય ચોકસાઈ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|21455|acre|ha|2}
→ 21,455 acres (8,682.53 ha){convert|21455|acre|ha|-2}
→ 21,455 acres (8,700 ha){convert|21455|acre|ha|2.5}
→ 21,455 acres (8,683 ha)[convert: invalid precision]
A precision value is entered after the conversion information. For example, |2
gives a result that is rounded to two decimal places, while |-2
rounds to the nearest 100 so that two zeroes occur at the end of the number. This message will only appear if warnings have been enabled.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
ચોકસાઈ ઘણી વધુ છે
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|m|ft|2}
→ 123 metres (403.54 ft){convert|123|m|ft|200}
→ [convert: precision too large]
Generally there is no reason to use a precision of more than a few decimal places, however, larger values may be used. The error shown occurs if the requested precision is higher than the maximum supported by the server.
A negative precision rounds to the nearest 10 (parameter |-1
), or nearest 100 (|-2
), or nearest 1000 (|-3
), etc. A large negative precision produces a zero output.
{convert|123|m|ft|-2}
→ 123 metres (400 ft){convert|123|m|ft|-200}
→ 123 metres (0 ft)
Using a very small input value can cause the default precision to exceed the limit (1.234e-200
is 1.234×10−200). For such very small values, it is better to use the |sigfig=
option.
{convert|1.234|m|ft}
→ 1.234 metres (4.05 ft){convert|1.234e-200|m|ft}
→ [convert: precision too large]{convert|1.234e-200|m|ft|sigfig=3}
→ 1.234×10−200 metres (4.05×10−200 ft)
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અમાન્ય અપૂર્ણાંક
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|12.31|m|ftin|frac=8}
→ 12.31 metres (40 ft 4+5⁄8 in){convert|12.31|m|ftin|frac=1}
→ 12.31 metres (40 ft 5 in)*{convert|12.31|m|ftin|frac=on}
→ 12.31 metres (40 ft 5 in)*
A fraction denominator can be specified to display results with a fraction where appropriate. For example, |frac=8
specifies that the value should be rounded to the nearest eighth, and that a fraction should be included if necessary. A fraction denominator must be a whole number with value 2 or more. This message will only appear if warnings have been enabled.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અમાન્ય અર્થપૂર્ણ આંકડા
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|1234|ft|m|sigfig=2}
→ 1,234 feet (380 m){convert|1234|ft|m|sigfig=0}
→ 1,234 feet (376 m)[convert: invalid sigfig]{convert|1234|ft|m|sigfig=2.5}
→ 1,234 feet (376 m)[convert: invalid sigfig]
The number of significant figures in the result can be specified. For example, |sigfig=2
requests two significant figures. The number of significant figures must be a whole number with value 1 or more. This message will only appear if warnings have been enabled.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
ખાલી વિકલ્પ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|m|ft|sp=us}
→ 123 meters (404 ft){convert|123|m|ft|sp=}
→ 123 metres (404 ft)[convert: empty option]
The option |sp=us
specifies that US spelling should be used ("meters" instead of "metres"). However, |sp=
has no effect as no value is specified. This message will only appear if all warnings have been enabled.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અમાન્ય વિકલ્પ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|m|ft|abbr=off}
→ 123 metres (404 feet){convert|123|m|ft|abr=off}
→ 123 metres (404 ft)[convert: invalid option]
The option |abbr=off
specifies that abbreviations are off, that is, unit names will be used instead of symbols. By contrast, |abr=off
is ignored because "abr" is not the name of an option. This message will only appear if warnings have been enabled.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
એકમ નામ જરૂરી
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|12|ft}
→ 12 feet (3.7 m){convert|12}
→ 12[convert: needs unit name]{convert|12||ft}
→ 12[convert: needs unit name]{convert|12|x|20|ft}
→ 12 by 20 feet (3.7 m × 6.1 m){convert|12|x|20}
→ 12 by 20[convert: needs unit name]
A unit code must be specified following the input number or numbers.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અજાણ્યું એકમ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|12|ft|mi}
→ 12 feet (0.0023 mi){convert|12|Ft|mi}
→ 12 Ft[convert: unknown unit]{convert|12|ft|m i}
→ 12 feet ([convert: unknown unit])
Each unit code must exactly match a known unit, case sensitive. A simplified list of unit codes is at Help:Convert units, and all available unit codes are here.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
એકમ અસમાન
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|psi|Pa}
→ 123 pounds per square inch (850,000 Pa){convert|123|psi|ha}
→ 123 pounds per square inch ([convert: unit mismatch])
It is only possible to convert between units that have the same type. For example, psi
and Pa
are each of type "pressure" so a psi
value can be converted to Pa
. However, a psi
value cannot be converted to a unit of a different type, such as ha
(hectare) which has type "area".
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
સંદિગ્ધ એકમ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|21|mpgus|L/km}
→ 21 miles per US gallon (0.11 L/km){convert|21|mpg|L/km}
→ 21 mpg[convert: ambiguous unit]{convert|21|USpt|L}
→ 21 US pints (9.9 L){convert|21|pt|L}
→ 21 pt[convert: ambiguous unit]
Some unit codes are not supported; using them results in an message indicating that a different unit code should be chosen.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
અહીં અમાન્ય એકમ
વધુ જાણકારી માટે સંદેશા પર માઉસ ફેરવો.[lower-alpha ૧]
{convert|123|K|C F}
→ 123 K (−150 °C; −238 °F){convert|123|C F|K}
→ 123 C F[convert: unknown unit]{convert|12345|ft|mi km}
→ 12,345 feet (2.3381 mi; 3.763 km){convert|12345|ft|yd+mi+km}
→ 12,345 feet (4,115 yd; 2.3381 mi; 3.763 km){convert|12345|ft|yd+mi km}
→ 12,345 feet ([convert: unknown unit])
Some units can only be used as outputs. For example "C F
" displays a temperature in Celsius and Fahrenheit. Such a unit cannot be used with an input value, because, for example, there is no such temperature as "123 C F
". Some output combinations are predefined—"C F
" is one example, and "mi km
" (miles and kilometres) is another. It is also possible to construct an output combination by joining unit codes with "+
". However, individual units have to be specified, and an output combination cannot be used.
આ ક્ષતિયુક્ત પાનાંઓ આપોઆપ શ્રેણી:અમાન્ય એકમો બદલોમાં મુકાઈ જશે.[lower-alpha ૨]
નોંધ
- ↑ ૧.૦૦ ૧.૦૧ ૧.૦૨ ૧.૦૩ ૧.૦૪ ૧.૦૫ ૧.૦૬ ૧.૦૭ ૧.૦૮ ૧.૦૯ ૧.૧૦ ૧.૧૧ ૧.૧૨ ૧.૧૩ ૧.૧૪ If the mouse pointer is positioned over the convert message (mouseover), extra information will appear in a popup window.
- ↑ ૨.૦૦ ૨.૦૧ ૨.૦૨ ૨.૦૩ ૨.૦૪ ૨.૦૫ ૨.૦૬ ૨.૦૭ ૨.૦૮ ૨.૦૯ ૨.૧૦ ૨.૧૧ ૨.૧૨ ૨.૧૩ ૨.૧૪ A category is only included in a page if it is in the article or template namespaces.